介紹油脂浸出設備生產線中為什么要用預榨機

        油脂浸出機械；介紹油脂浸出設備生產線中為什么要用預榨機
　　預榨機作為油脂浸出工段的前期運用油脂設備，其特色和使用規模是如何的呢?

　　Pre press as early use of oil equipment oil extraction process, its characteristics and the scale is how?

　　下面我們企鵝糧油油脂浸出設備專家為我們介紹一下：

　　Next, we introduce the introduction of oil and oil leaching equipment of the oil and oil:

　　一、浸出設備預榨機特色：

　　First, the characteristics of leaching equipment:

　　1、選用橫立絞龍同步工作，榨膛為軸向剖分式，膛殼用燕尾槽單螺栓壓塊中心點固定，膛殼開合選用絞鏈構造，并運用冷-暖構造冷卻;

　　1, the choice of horizontal vertical auger synchronization, the press bore axially split, casing bore dovetail groove single bolt of pressure center of the block is fixed, the chamber shell closure selection hinge structure, and the use of cold - warm cooling structure;

　　2、螺旋總程為分段構造，螺旋與襯套之間選用了迷宮式密封襯墊，在螺旋一旁設置了防泄螺旋;

　　2, the total process of the screw is segmented, and the labyrinth seal gasket is used, and the anti leakage screw is arranged on the spiral side;

　　3、設計新穎、構造合理、兼有主動手動校餅功用，可不停機開膛整理和替換易損件，具有處理量大，能耗小、占地小、造價低一級長處。

　　3, novel design, reasonable structure, both active manually school cake function, without stopping the Ripper finishing and replace wearing parts, with large quantity, small energy consumption, covers an area of small, low cost level strengths.

　　二、浸出設備預榨機使用規模：

　　Two, leaching equipment used in the scale of pre press:

　　適用于壓榨油菜籽、茶籽、大豆、花生、葵花籽、棉籽、芝麻等各種堅果類植物油質料。

　　Suitable for crushing, tea seed, soybean, rapeseed, peanut, sunflower seeds, sesame seeds and other nuts cottonseed oil material plant.